Bel Canto Design PL-1 Spécifications télécharger pdf (Page 55)

The Initial Settings Menu08

66

En

3 Use the joystick (up/down) to change

the distance.

• When you change the distance settings

of the front left (L) or front right (R)

speakers, all the other speaker dis-

tances change relative to it.

• Front left/right (L/R) speakers can be set

from 1 ft. to 30 ft. in 0.5 ft. increments.

• Center speaker (C) and subwoofer (SW)

can be set from – 6.5 ft. to +6.5 ft.

relative to the front left/right speakers

• Surround left/right (LS/RS) speakers can

be set from –20 ft. to +6.5 ft. relative to

the front left/right speakers.

4 Move the cursor left to go back to the

speaker list if you want to modify

another speaker, or press ENTER to exit

the Speaker Distance screen.

• Speaker Distance settings do not affect

SACD playback.

Channel Level

• Default setting: Fix

You only need to make this setting if you

onnected this player to your amplifier using

the 5.1 channel analog outputs.

This setting does not affect digital audio

output.

Digital Audio Out

Video Output

Language

Display

Options

Speakers

Audio Output Mode

Speaker Installation

Speaker Distance

Channel Level

Fix

Variable

Initial Settings

When set to Fix, the level of each of the 5.1

channel analog outputs is fixed. Choose

Variable if you want to adjust the relative

levels to balance the surround sound better

for your listening room.

Digital Audio Out

Video Output

Language

Display

Options

Speakers

L

C

R

RS

LS

SW

Auto

0.0dB

0.0dB

0.0dB

0.0dB

0.0dB

0.0dB

Initial Settings

You can set the individual channel levels

between –6dB and +6dB using the test tone

output as a guide to set the correct levels.

Adjust the levels until the output level from

all channels sounds the same from your

usual listening position.

Automatic: Select Auto to start the test tone

output.

Digital Audio Out

Video Output

Language

Display

Options

Speakers

L

C

R

RS

LS

SW

Auto

0.0dB

0.0dB

0.0dB

0.0dB

0.0dB

0.0dB

Initial Settings

As the test tone plays through each speaker

in turn, it is highlighted on-screen. Use the

joystick (up/down) to adjust the channel

output level of the current speaker. Note that

the test tone is not output from the

subwoofer. Move the joystick left to exit the

test tone sequence, or ENTER to save the

settings and exit the channel level setting

screen.

1

7

54

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 72 73

Commentaires sur ces manuels

Pas de commentaire